PLEASE SELECT THE DESTINATION COUNTRY AND LANGUAGE :
카테고리 전체보기
상품명 | 알루미늄 압출 |
---|---|
판매가 | - |
Application | Aluminium Extrusion |
원산지 | 이스라엘 |
배송비 | ₩3,000 (₩30,000 이상 구매 시 무료) |
수량 |
할인가가 적용된 최종 결제예정금액은 주문 시 확인할 수 있습니다.
Temperature is the most important parameter in Aluminum Extrusion Process controlling Production, Wastage, Cost, Quality and the Life of the Press.
Aluminum extrusion being dynamic processes, accurate continuous temperature control is possible only by using non-contact pyrometers.
Accurate Sensors Technologies enjoys a worldwide reputation for its unique pyrometers specially designed for Aluminum Extrusion process
Why use Multiwavelength IR Pyrometer in Aluminium Extrusion Lines?
1. Productivity – Allows for increased extrusion speed
2. Quality – Better profiles, reduces amount of scrap produced
3. Energy – Saves gas or electricity at the Die Furnace, Billet Furnace and Container electrical element.
Billets
Billets are heated in heating furnace to the required temperature, usually around 420-500 °C.
The heating is intended to reduce the flow stress of the aluminum alloys and to avoid cracks and surface defects due to high temperature.
Recommended Product: AB3000
Installation of AST Pyrometers for Billet temperature measurement
The aluminum profiles are typically extruded at extrusion speeds in the range of 5 – 50 m/min depending on the alloy used and the profile complexity.
Entry of overheated or under heated billets to the container controls the speed, quality and wastage. As extrusion speed is increased productivity is increased.
For example, if aluminum profiles are usually extruded at a low temperature of 520°C and the extrusion temperature is increased to 560°C, the extrusion press speed can be dramatically increased.
Benefits: When profiles are extruded at very high temperatures, for example between 580°C to 600°C, product may be damaged. AST pyrometers can prevent this damage.
AST customers report increased productivity rates of 5 - 10%.
Recommended Products : AE3000, AE3000+PS3000
Installation of AST Pyrometers at Press Exit
On leaving the die, the extrusion is cooled through the use of air or water quenches.
This is a critical step to ensure proper homogenous structure, dimensions and strength characteristics of extrusions.
Benefits: Based on the intended use of the aluminum profiles, they are required to have different mechanical properties such as strength and hardness.
These properties are achieved in two operations. The first one involves cooling of profiles in the extrusion process through the proper temperature adjustment
and other one being control of extrusions leaving the die.
Recommended Products : AC3000, AC3000+PS3000
Installation of AST Pyrometers at Cooling Table
고액결제의 경우 안전을 위해 카드사에서 확인전화를 드릴 수도 있습니다. 확인과정에서 도난 카드의 사용이나 타인 명의의 주문등
정상적인 주문이 아니라고 판단될 경우 임의로 주문을 보류 또는 취소할 수 있습니다.
무통장 입금은 상품 구매 대금은 PC뱅킹, 인터넷뱅킹, 텔레뱅킹 혹은 가까운 은행에서 직접 입금하시면 됩니다.
주문시 입력한 입금자명과 실제입금자의 성명이 반드시 일치하여야 하며, 7일 이내로 입금을 하셔야 하며 입금되지
않은 주문은 자동취소 됩니다.
배송 방법 : 택배
배송 지역 : 전국지역
배송 비용 : ₩3,000
배송 기간 : 1일 ~ 3일
배송 안내 : - 산간벽지나 도서지방은 별도의 추가금액을 지불하셔야 하는 경우가 있습니다.
고객님께서 주문하신 상품은 입금 확인후 배송해 드립니다. 다만, 상품종류에 따라서 상품의 배송이 다소 지연될 수 있습니다.
교환 및 반품이 가능한 경우
- 상품을 공급 받으신 날로부터 7일이내 단, 가전제품의
경우 포장을 개봉하였거나 포장이 훼손되어 상품가치가 상실된 경우에는 교환/반품이 불가능합니다.
- 공급받으신 상품 및 용역의 내용이 표시.광고 내용과
다르거나 다르게 이행된 경우에는 공급받은 날로부터 3월이내, 그사실을 알게 된 날로부터 30일이내
교환 및 반품이 불가능한 경우
- 고객님의 책임 있는 사유로 상품등이 멸실 또는 훼손된 경우. 단, 상품의 내용을 확인하기 위하여
포장 등을 훼손한 경우는 제외
- 포장을 개봉하였거나 포장이 훼손되어 상품가치가 상실된 경우
(예 : 가전제품, 식품, 음반 등, 단 액정화면이 부착된 노트북, LCD모니터, 디지털 카메라 등의 불량화소에
따른 반품/교환은 제조사 기준에 따릅니다.)
- 고객님의 사용 또는 일부 소비에 의하여 상품의 가치가 현저히 감소한 경우 단, 화장품등의 경우 시용제품을
제공한 경우에 한 합니다.
- 시간의 경과에 의하여 재판매가 곤란할 정도로 상품등의 가치가 현저히 감소한 경우
- 복제가 가능한 상품등의 포장을 훼손한 경우
(자세한 내용은 고객만족센터 1:1 E-MAIL상담을 이용해 주시기 바랍니다.)
※ 고객님의 마음이 바뀌어 교환, 반품을 하실 경우 상품반송 비용은 고객님께서 부담하셔야 합니다.
(색상 교환, 사이즈 교환 등 포함)
앗! 화면폭이 너무 좁아요.
브라우져의 사이즈를 더 늘여주세요~
좁은 화면으로 보실 때는 모바일 기기에서
최적화된 화면으로 쇼핑을 즐기실 수 있어요~